Hedge trimmers are a necessary tool for many homeowners, but like any machine, they can require regular maintenance to keep them working optimally. One of the most important things you can do to keep your hedge trimmer running smoothly is to regularly oil its blades.
In this article, we’re going to show you how to oil hedge trimmer blades the right way, so that they stay running smoothly and efficiently for years to come.
What is oiling hedge trimmer blades?
Hedge trimmer blades can be oiled to keep them running smoothly. Oiling the blades helps to reduce friction and wear on the equipment. It also keeps the blades from rusting and helps to extend their life.
Types of oiling hedge trimmer blades
There are a few different ways to oil hedge trimmer blades. You can either use a motor oil, gear oil, or hydraulic oil. Motor oil is the most common type of oil used for hedge trimmers. Gear oil is used to lubricate the chain and sprocket. Hydraulic oil is used as a reserve lubricant and for added protection against corrosion.
It’s important to choose the right type of oil for your hedge trimmer. Make sure to read the manufacturer’s instructions for using the hedge trimmer’s specific type of oil. Follow the manufacturer’s recommendations when it comes to dosage and frequency of application. Never use too much oil or apply it too often – this could damage your hedge trimmer.
If you have any questions about how to properly oil your hedge trimmer blade, feel free to ask us in the comments section below or on our Facebook page.
How to oil hedge trimmer blades
When it comes to hedge trimmer blades, it is important to keep them well-oiled in order to ensure good performance. Here are a few tips on how to oil hedge trimmer blades:
- Remove the blade guard. On most hedge trimmers, the blade guard is easily removable by rotating it counterclockwise. Be careful not to lose the spring clip that attaches it to the trimmer housing. Once the guard is off, unscrew the oil cap and pour about a tablespoon of oil into the hole at the base of the blade. Replace the blade guard and screw it back on.
- Start your engine and wait until it reaches full speed before cutting any hedges. This will help oil flow down into all of the blades.
- Cut your hedges and then stop immediately after each cut, allowing the engine to cool down completely before restarting. Doing this will help distribute oil throughout the entire blade assembly.
What to do if your hedge trimmer blade doesn’t oil well
Do you oil your hedge trimmer blades regularly? If not, now may be the time to start. Hedge trimmer blades that are not oiled can overheat and cause damage to your equipment. Overheating can also cause the blades to break.
How Often Should I Oil My Hedge Trimmer Blades?
There is no one definitive answer to this question since it depends on how often you use your hedge trimmer and the type of hedge trimmer blade you have. However, typically you should oil your hedge trimmer blades every 1-2 hours of use.
How Can I Tell If My Hedge Trimmer Blade Needs Oiling?
There are a few indicators that your hedge trimmer blade may need oiling. First, if the hedge trimmer starts to overheat frequently or makes strange noises, it may be due to a lack of oil. Second, if the blade doesn’t seem to be cutting as well as it used to, it may be due to a lack of oil. Finally, if the blade starts to rust or tarnish quickly, it may need an overhaul and may need to be re-oiled regularly.
Conclusion
Many homeowners choose to oil their hedge trimmer blades in order to extend the life of the equipment and reduce potential damage. Oiling Hedge Trimmers can help keep the blades sharp, which will prevent them from becoming blunt over time. There are a few different oils that can be used on hedge trimmer blades, depending on what type of cutting you plan on doing with your equipment.