Every homeowner or professional landscaper knows that a good brush cutter blade is essential for efficiently trimming bushes, trees and other plants. As brush cutters get longer in the tooth, they can start to require more and more force to cut through brush. This can quickly lead to worn out blades and even accidents if not properly cared for. In this article we will show you how to sharpen a brush cutter blade so that it is performing at its best.
What You’ll Need
To sharpen a brush cutter blade you’ll need a sharpening stone, a stropsharpener, and a brush cutter blade.
The first step is to choose the right sharpening stone. Sharpening stones come in different grits and should be chosen based on the type of brush cutter blade that you are sharpening. A coarse grit will sharpen the blade quickly and a fine grit will create a smooth finish.
The next step is to find a stropsharpener. Stropsharpeners come in both manual and electric models, and can be used to quickly shave off the burrs from the knife edge.
Finally, use the brush cutter blade to cut items like fabric or trim. Make sure to hold the tool at an angle so that the blade cuts cleanly through materials.
How to Sharpen a Brush Cutter Blade
If you are like most people, you probably don’t think much about how to sharpen your brush cutter blade. After all, it’s a tool that you use to cut brush and that’s it. But in reality, proper sharpening of your brush cutter blade can make all the difference when cutting brush.
Here are a few tips on how to sharpen a brush cutter blade:
- Start by holding the brush cutter blade at a 20-degree angle and using a fine-grit sandpaper to sand the entire length of the blade. This will remove any burrs or metal filings that may be present on the blade.
- Next, use a 180-grit sandpaper to smooth out the finish. This will ensure that the blade cuts smoothly and without hesitation.
- Finally, use a 400-grit sandpaper to give the blade an extremely sharp edge. It’s important to note that over sharpening the blade can cause it to chip or break. So take your time and make sure that the edge is perfect before moving on to the next step.
Common Mistakes People Make When Sharpening a Brush Cutter Blade
There are a few common mistakes people make when sharpening a brush cutter blade. The first and most common mistake is not using the correct sharpening angle. Too much or too little pressure, or an incorrect angle will cause the blade to become dull quickly.
Another mistake people make is not keeping the blade sharpened evenly. If one side of the blade is sharper than the other, it will cause the blade to wear unevenly and eventually become dull. A good way to keep your brush cutter blade sharp is to sharpen it once a month using a sharpening stone or honing rod.
Conclusion
If you’re like many gardeners, you probably have a brush cutter blade that’s starting to show its age. It might not be cutting as smoothly as it once did, or the teeth may not be sharp enough to get the job done. In this article, we’ll show you how to sharpen your brush cutter blade using a simple DIY technique. By following these steps, you’ll be able to restore your brush cutter blade to its former glory and keep it working for years to come.