How Thick A Branch Can A Hedge Trimmer Cut

Before you go out and buy a hedge trimmer, you need to know how thick a branch it can cut. With today’s growth in landscaping and hedging, knowing how thick a branch can be cut is important. This article will give you the information you need to make an informed purchase.

Hedge Trimmer Parts

When it comes to hedges, you want them to be as close to the ground as possible to reduce the chance of being hit by a branch. A hedge trimmer with a thin blade can’t handle thick branches very well.


If you have a hedge trimmer with a thick blade, make sure you use it sparingly. It’s better to go around the bush with a sharp tool rather than try to cut through it with a blunt one.

Hedge Trimmer Operation

The hedge trimmer is a handheld tool used to trim trees and shrubs. It has a blade that is adjustable to different heights and widths, making it versatile for different types of hedges.


The hedge trimmer operates with a cable system. There are three main parts to the hedge trimmer: the engine, the handle, and the spool. The engine powers the blade while the handle moves it. The spool guides the wire through the blade and controls how closely it lines up with the blade.


The blade on a hedge trimmer can be adjusted to different thicknesses. A thicker blade will cut more deeply into the wood, while a thinner blade will make more superficial cuts. It is important to match the thickness of the branch being trimmed to the thickness of the blade on your hedge trimmer. If you are unsure about how thick a branch can be cut with your hedge trimmer, consult your owner’s manual.

Hedge Trimmer Care and Maintenance

Hedge trimmer care and maintenance is important to keep your trimmer in top condition. Properly cleaning and lubricating your hedge trimmer will help to prevent problems and make the trimmer perform at its best.


To clean your hedge trimmer:

1) Disconnect the battery power supply.

2) Remove the hedge trimmer head (left-hand thread).

3) Remove the blade cover (4 screws on one side, 2 screws on the other).

4) Wipe down all parts with a clean dry cloth.

5) Apply a light coat of machine oil to the blade and shaft. Replace the blade cover and connect the battery power supply.

6) Check for any loose parts and replace as necessary.

7) IMPORTANT: Be sure to check the oil level after each use, and add more if necessary. Use only genuine tools professional grade oil!

The Different Types of Hedge Trimmers

When it comes to hedge trimming, there are a few different types of hedge trimmers that you may come across. Here’s a breakdown of each type:

Electric Hedge Trimmers:

Electric hedge trimmers are the most common type of hedge trimmer and they’re available in both corded and cordless varieties. They’re great for quick cuts around bushes and trees, and they have extended reach thanks to their electric motor.

Gas Hedge Trimmers:

Gas hedge trimmers are also available in both corded and cordless varieties, but they typically have longer cutting blades than electric hedge trimmers. They’re great for larger areas like hedges, and they also have a lot more power when it comes to cutting through tough branches.

Powered Chainsaw Hedge Trimmers:

Powered chainsaw hedge trimmers are a specialty tool that’s only used for cutting hedges. They typically have very long blades that make it easy to cut through thick branches, and they also come with a lot of power when it comes to cutting through tough materials.

Hedge Trimmer Cutting Thick Branches

Hedge trimmers are often used to trim hedges, but they can also be used to cut thicker branches. Here’s how thick a branch can a hedge trimmer cut:


Thicker branches will require a higher-powered hedge trimmer. These machines typically have a blade that is 2 inches or wider. If the branch is thicker than 2 inches, you will need to get a special hedge trimmer that has a blade that is 3 or 4 inches wide.


If the branch is thicker than 4 inches, you will need to get a special hedge trimmer that has a blade that is 6 or 8 inches wide.

Hedge trimmers typically have a limit of 10 inches in blade width. So, if the branch is thicker than 10 inches, you will need to get a special hedge trimmer that has a blade that is 12 or 14 inches wide.


Trimming hedges can be a bit of a challenge, but with the right tools and some practice you’ll be able to get the job done in no time. Make sure to use the right hedge trimmer for the task at hand — too thick a branch will require more power to cut, while branches that are too thin may not hold up under heavy use. Be patient and take your time; it’s worth it to have a neatly trimmed hedge!


Leave a Comment