How To Trim Cedar Hedge With Electric Trimmer

Trimming a cedar hedge can be a difficult task, but with the help of an electric trimmer, it can be done quickly and easily. Follow these tips to get started.

What you will need

-Electric hedge trimmer

-Cedar hedge

-Safety gear including a face mask and gloves

-Sturdy work surface such as a patio or deck

-Lawnmower blade cutting edge or similar sized object to cut the tree branches off at an angle

  1. Make sure your electric hedge trimmer has enough power by checking the voltage and amp rating. Most hedge trimmers have a range of voltages from 110 to 240 volts and between 1 and 3 amps.
  2. Decide where you will be cutting the cedar hedge. If you are trimming it on a patio or deck, make sure the surface is sturdy enough to support the weight of the electric hedge trimmer and the cedar branch. If you are using a lawnmower blade to cut the cedar branches, make sure to angle it so that the cutting edge is touching the branch but not cutting into the trunk of the tree.
  3. Park your lawnmower or other vehicle safely away from the cedar hedge and get out wearing safety gear including a face mask and gloves. Begin by positioning yourself so that you are facing down towards the ground and hold onto one.

How to trim the cedar hedge

If you are looking to trim your cedar hedge by hand, there are a few things that you will need to take into consideration. First, make sure that the hedge is at least 2 feet high so that you have enough room to work. Second, be careful not to cut too close to the ground; the hedge’s roots will grow back and may be difficult to remove later on. Finally, use an electric trimmer to avoid damaging the foliage.

Tips for electric trimming

Electric hedge trimmers come in a variety of lengths and widths, so it can be difficult to know which one to buy. Here are some tips for choosing the right electric hedge trimmer for your needs:

-If your hedge is short and wide, consider buying a shorter trimmer.

-If your hedge is long and thin, consider buying a wider trimmer.

-If you have a lot of tall hedges, consider buying a high-power model.

-If you have a lot of low-hanging branches, consider buying a model with a line feeder.

Once you’ve chosen your electric hedge trimmer, here are some tips for using it:

-Start by trimming the top of the hedge first. This will help reduce the chance that the trimmer will accidentally hit the trunk or branches below.

-Make sure to use safety gear, including goggles, hearing protection, and gloves.

-Trim in an upward direction if possible, to avoid damaging the branches. If you need to trim down a branch that’s hanging over the edge of the hedge, tilt the unit forward so that the blade is above the branch and pull the trigger.


Trimming a cedar hedge with an electric trimmer can be a tricky job, but with the right tools and instructions, it can be done easily. Follow these steps to get started:

  1. Line up the hedge so that the top is centered in the cutting path of the trimmer.
  2. Turn on the trimmer and guide it along the top of the hedge while maintaining contact with both sides of the blade.
  3. Hold down on one side of the hedge while turning off-center to trim around any objects or branches that are in your way.
  4. Repeat on the other side of the hedge, being sure to keep an even depth of cut all around.


Leave a Comment