Hedge trimmers are a common tool used to cut hedges and other plants. If your hedge trimmer starts to bog down or produce poor results, it’s likely that the blades need to be cleaned. Here we’ll show you how to clean hedge trimmer blades using simple, safe methods.
What Hedge Trimmer Blades Should You Spray With
Hedge trimmer blades can quickly become clogged with debris if not cleaned on a regular basis. Here are four general tips for cleaning hedge trimmer blades:
- Spray the blade with a degreasing agent before cleaning. This will loosen any built-up debris and make the job much easier.
- Use a brush to clean around the blade’s cutting edge.
- Wipe down the entire blade with a cloth soaked in a light detergent solution. Just be sure to rinse off the blade immediately after cleaning to avoid water spots and build-up.
- Finally, use a metal polish to restore the blade’s finish and keep it looking its best.
How Often to Spray Hedge Trimmer Blades
Regularly spraying the blades of your hedge trimmer with a quality cutting oil will help ensure that the blades stay sharp and perform well. A good rule of thumb is to spray the blade every time you use the machine, but you may need to adjust this frequency depending on the type of vegetation and condition of your hedge.
What to Look for When spraying Hedge Trimmer Blades
When it comes to keeping your hedge trimmer blades in good working condition, there are a few things that you should always keep in mind. First and foremost, make sure that you are using the correct type of spray. Not all sprays are created equal, and some could potentially damage your blades.
Secondly, be sure to clean your blades regularly. This not only keeps them performing at their best, but also helps to prevent build-up of debris and other materials that can eventually cause the blades to break. Finally, make sure that you have the appropriate spay equipment for the job at hand. Not all hedge trimmers require the use of special sprays, so be sure to ask your retailer if you’re unsure.
What If you don’t have Hedge Trimmer Blades?
If you don’t have hedge trimmer blades, you can use an old pair of scissors to trim your hedges. Be sure to wear gloves and safety glasses to protect your eyes and nose from flying debris.
You might be wondering what to spray on your hedge trimmer blades to keep them running smoothly. Here are a few suggested solutions:
- WD-40 – This common lubricant is effective at keeping most machines running smoothly, including hedge trimmers.
- Oil of Oregano – A natural oil that is often used as a cooking oil, this solution helps prevent rust and corrosion from forming on metal surfaces.
- Lemon Juice – Similar to WD-40, lemon juice can help restore the luster and smoothness to blades that have been dulled over time.